Alongside chronic pain, the emphasis is on limitations of movement. Secondary problems from this include muscle wasting and reduced bone density. Changes to the cartilage around the joints can interfere with movement. All of these factors can be positively influenced with combination orthopedic chest pain therapy. Chip #5 is used to build up bone in cases of osteoporosis.
Chip #2 gives off bio-frequencies which relieve pain while chip #4 is used to reduce inflammation.
Sanza can be used to treat
1. Bechterew's disease, also known as- ankylosing spondylitis. Rehumatic disease and chronic inflammatory of the axial skeleton. Morning stiffness, pain at night in the area of the lumbar spine, arthritis of the joints in the lower limbs, severe heel pain, progressive changes of the spine with limitation of movement and complete rigidity of the spine in the end stage.
2. Sudeck's syndrome can also be treated effectively by Sanza. Painful condition of an extremity, usually as a consequence of injury or surgery.
3. Muscle Tension
Pain on movement, limitation of movement due to stiffening of the muscles are especially suitable for the use of MFT, BFS and laser treatment.
4. Shoulder-arm syndrome, frozen shoulder
Pain on movement, restricted movement in the shoulder joint
5. Trigger Finger
Wear-related thickening of the flexor tendon of the hand.
6. Pain, thoracic spine disc problems
Bio-frequencies from Chip #2 relieve pain while Chip #4 reduces inflammation.
This category groups together a number of different problems, since the use of MFT, BFS and laser treatment can achieve especially good results
Painful swelling in the joint area following injury or strain
8. Dupuytren's Contracture
Flexion contraction of the finger as a result of coarse hardening and shrinkage of the aponeurosis of the palm.
9. Degenerative changes of the Lumbar Spine- Osteoporosis
Pain in the lower back area is positively influenced by PEMF application. The laser and bio-frequencies of the chips increase the muscle-relaxing, bone-building and inflammation-inhibiting effects.
Applicators of choice:
- Mat; local-depending on the symptoms
- Cushion- wand with laser attached
- Helmholtz applicators
- BFS Chip #1, 2 and Special Chip #5
- Muscle Tension
- Pain, thoracic spine disc problems, fibromyalgia
- Shoulder-arm syndrome, frozen shoulder
- Bechterew's disease (ankylosing spondylitis)
- Arthrosis, arthritis
- Carpal tunnel syndrome
- Golf/tennis elbow
- Trigger finger
- Dupuytren's contracture
- Sudeck's syndrome
Sanza has devices to help with orthopedic chest pain treatment.
In case of the head, irritations and inflammations of the tendons, muscle attachments, and tendon sheaths respond quite well to orthopedic head pain treatment.
With acute and chronic muscle strains, they can be released effectively with combination therapy by Sanza to provide orthopedic head pain therapy.
- Stiff neck (torticollis)
- Cervical spine syndrome
- Degenerative changes of the cervical spine
In case of orthopedic leg pain treatment, Chip #5 can be used to build up bone in cases of osteoporosis. Changes to the cartilage around the joints can interfere with movement. But Sanza can be used for providing orthopedic leg pain therapy.
Sanza can be used to treat
1. Muscle Pain
Pain that occurs when the muscles are stressed.
Cell metabolism and a good supply of oxygen and nutrients to the muscles are effectively supported with PEMF, laser and BFS treatment.
2. Sprain, Contusion, Strain
The pain-relieving and swelling-reducing effect of PEMF, laser and BMF treatment with chips is beneficial for the healing processes and well-being.
3. Following Joint Replacement
The prosthesis integrates quickly and well into the bone with the use of PEMF, laser and BFS treatment.
Painful swelling of the bursa, usually occurring after excessive strain.
5. Achilles tendinitis and injury
Injuries can occur following excessive strain or sudden, severe stress on the tendon. PEFM, laser and BFS with the chips accelerate the healing processes and reduce pain.
Inflammatory joint disease with the following symptoms: Pain, swelling, excessive heat, limitation of movement, joint effusion
Cause: triggered by pathogens, as a secondary condition from other diseases, rheumatoid disease and others.
Degenerative joint change usually occurring following excessive exertion or positional deformities of the joint structures.
Symptoms include limitation of movement, pain, stiffness, deformity, etc.
8. Calcaneal Spur
Bony deposit on the calcaneum caused by long-term strain (tension of the aponeurosis on the sole of the foot and/or Achilles tendon).
The pain-relieving and relaxing effect on the muscles has a favourable impact on symptoms.
9. Foot Pain
With deformities and following over-exertion, pain can occur in the mid-foot area (aponeuritis) or in the toe joints and in the ankle.
10. Joint Effusion
Fluid collection in the joint following injury or excessive strain or caused by infection.
11. Bone Fracture
Bone build-up to bridge the fracture line is increased using PEMF with laser and BFS. Treatment can be carried out following stabilization of the fracture with metal (screws, plates).
12. Internal Knee damage, meniscus, crucial and lateral ligament
Depending on the problem, injuries to the knee structures can be treated either conservatively or surgically. PEMF, laser and BFS are used before and after surgical intervention, as well as during conservative treatment.
13. Hallux Valgus
Balls, exertional deformity when the foot is splayed
In the early stages, as well as following corrective surgery, the use of PEMF, laser and BFS with Chip #1 and 2, and if necessary Special Chip #5, can be beneficial.
- Joint effusion
- Internal knee damage, meniscus, crucial and lateral ligament
- Bone fracture
- Following joint replacement
- Muscle pain
- Calcaneal spur
- Sprain, contusion, strain
- Achilles tendinitis and injury
- Hallux valgus
- Gout, hyperuricaemia
- Foot pain
Applicator of choice:
Mat, cushion, wand with laser attachment, Helmholtz applicator, BFS Chip #1, 2
In case of the pelvis, secondary problems from this include muscle wasting and reduced bone density. All of these factors can be influenced positively with combination therapy for orthopedic pelvic pain treatment.
Chip #5 can be utilized to build up bone in case of osteoporosis and help with orthopedic pelvic pain therapy.
Sanza can be used to treat
1. Sciatic Pain, Sciatica
Pain in the area supplying the sciatic nerve with varying causes
The improved perfusion achieved through PEMF with laser assistance improves the supply of nutrients and removal of toxins from this part of the body.
2. Coccyx Contusion
Painful injury to the lower sacral region following a fall
3. Femoral Neck Fracture
As with all bone fractures, the healing phase is shortened significantly, any muscle loss caused by non-use of the limb is prevented or significantly reduced and this helps to achieve earlier and easier mobilisation. Any joint replacement necessary integrates quickly.
4. Hip Joint Damage
Degenerative changes (arthrosis) and inflammatory conditions (arthritis) of the hip joint can be treated very effectively with PEMF, laser and BFS.
Artificial hip joints heal well following surgery.
5. Sacroiliac Joint Block
Blockage of the sacroiliac joints for varying reasons causes back pain which can radiate to the upper thighs.
- Hip Joint Damage
- Femoral neck fracture
- Sacroilac joint block
- Sciatic pain, sciatica
- Coccyx contusion
Applicators of choice:
Mat; local: cushion - wand with laser attachment - Helmholtz applicator, BFS Chip #1, 2 and Special Chip #5